This machine uses vertical drum structure. Transport mesh belt feed the bottle with screw. Clip the bottle, and turn it around by mechanical arm in continuous rotation. Washing spray pipe does swing and track movement repeatedly. Spray water and air alternately when the bottle is in upside down, and use ultrasonic washing. It has excellent washing effect. Machine is made up by bedplate, drum, screw lifter, transmission gear, water pump, filter and etc. After water injection, bottles move to water channel for 1-minute ultrasonic washing. Then screw sends bottles to lift wheel. Mechanical arm to clip them and turn 180 degrees to upside down. Wash them by water and air alternately.

All the cleaning fluid contacted parts use SS304 and non-toxic corrosion-resistant material. All working area use PC glasses. Prevent from the outside pollution. Machine has the ultimate filter. It makes cleaning water and compressed air reach the cleaning washing requirement.

This machine uses AC motor drive, frequency speed control and PLC control circuit. It has reliable performance. Water in tank has automatic constant temperature control with water level control switch. It prevents the machine from pump, ultrasonic and heater turning on in waterless condition. Pipeline has pressure display. Adjust the pressure by diaphragm valve. This machine can receive the signal from sterilization oven, filling and sealing machine. When bottle is in jam, machine will turn off automatically.

1.2 Specification

Bottle Size: 2 ml Ampoule

Capability: 6000 bottles/hr (2ml)

Bottle Washing Quality Rate: >99%

Bottle Break Rate: <0.3%

Water Consumption: 0.4-0.6 m3/h in 0.2-0.3 mpa

Gas Consumption: 40-50 m3/h in 0.25-0.35 mpa

Outside Dimension: 2099*2036*1350 mm

Machine Weight: 2,500 kg

Power Supply: 380 V/ 50 Hz

Power Consumer: 17.6 kw

2.ASMR620-48 Tunnel Hot Air Circulation Oven

2.1Brief Introduction

This machine is mainly used in pharmaceutical industry for drying sterilization for ampoule, vial and oral bottles.

This machine automatically feed, pre-heat, drying sterilize, cool and outcome the bottles. It uses laminar flow and hot-air fast sterilization. It makes bottles arrive National Clean Class 3 (American Industry Class 100) in the tunnel. It is the most fashionable and effective drying sterilization equipment. The heat distributes equally, and it has good effect on the heat removing.

This machine can be used separately, and it can also be used with bottle washing machine and filling machine in the production line.

2.2 Specification

Bottle Size	1-10ml Ampoule
Conveyor Belt Width	620mm
Sterilization Temperature	320±10℃ Adjustable
FH	＞1365
Sterilization Time	≥5min
Temperature Sensor Accuracy	≤±2℃
Empty Sterilization Temperature Range	≤±5℃
Full Sterilization Temperature Range	≤±7.5℃
Temperature at bottle out port	≤40j℃
Exhaust Air	3500-4100 m³/h
Electric Capacity	51kw (Electric Heater43kw)
Dimension	4388×1465×2445mm
Net Weight	3000Kg

3.AGF8 Filling and Sealing Machine

This machine is used for automatic ampoule filling and sealing in pharmaceutical industry.

AGF ampoule vertical filling and sealing machine can be used for bottle feeding, Nitrogen pre-filling, bottle filling, Nitrogen after-filling, pre-heat and draw bench sealing. It uses advanced intelligent electronic control technology, nice-looking human-computer interface. It can perfectly connect advanced pharmaceutical production and sterile production, and meet GMP requirement.

This can be used independently, and it can also be used with washing machine, tunnel oven and etc, so as to make the automatic production.

3.1Specification

Size	Ampoule 2ml
Actual Capacity (bottles/hr)	2ml: 6,000
Bottle Break Rate	≤0.05%
Filling Accuracy	Ceramic Pump(≤±1.5%)
Sealing Qualified Rate	≥99.9%
Sealing Gas	Coal Gas + Oxygen, Natural Gas
Gas fuel consumption and pressure	1.5-2.5 m³ /h , 0.2-0.3Mpa
Oxygen consumption and pressure	1.2-1.5 m³/h. ,0.2-0.3Mpa
Power	2.2kw
Dimension	AGF8:3791×1741×2380mm
Weight	2,500KG
Power Supply	380V 50HZ

Product Tags: